Need Help? Call: (866) 806-9379

0
0
0
0

Airpulse A300 A300PRO Bluetooth Speaker Active Bookshelf Speaker Subwoofer output Bluetooth APT-X 5.0 With Remote Control

$1,954.59$2,195.59

SKU: 3256803283846081 Category:

Description

  • Brand Name: RYCFENZ
  • Cabinet Material: Wood
  • Audio Crossover: Two-Way
  • Communication: AUX,Optical Input,Coaxial Input,USB,RCA
  • Speaker Type: Bookshelf
  • Channels: 2 (2.0)
  • Battery: No
  • Origin: Mainland China
  • Power Source: AC
  • Number of Loudspeaker Enclosure: 2
  • Input Power(W): 200-299W
  • Intelligent Personal Assistant: NONE
  • Certification: CE

Premium Hi-Res active speakers designed by Phil Jones

A300describe:

6.5-inch mid woofer
65mm ribbon tweeter
HiRes Audio with Built-in amp
Bluetooth, USB, optical, RCA inputs

Active Bookshelf Speaker – Hi-Res Audio Certified

The A300 speakers combine the quality of a reference monitor and retro

wood styling into an active bookshelf speaker. Simplicity married to quality is our motto with AirPulse. Connect the speakers to each other with the connecting cable and connect the speaker to your audio source directly with included cables. These speakers are sold in pairs out of the box and includes a remote.

65mm Aluminum Ribbon Tweeter

The A300 uses a thin aluminum horn loaded ribbon tweeter which extends frequency range and a well-defined resolution reaching to 40KHz high frequencies. The horn shape adds to a three-dimensional sound as the ribbon tweeter is aimed at the listener and minimizes unwanted effects from room reflection.

6.5-Inch Aluminum Mid-Woofer

The A300 active bookshelf speaker is equipped with a 6.5-inch aluminum alloy cone mid-range woofer unit. Each magnet has a 50mm diameter edge-wound copper clad aluminum ribbon voice coil for maximum linear excursion and control.

DESIGN

AirPulse’s A300 is designed by Phil Jones. The technical and aesthetic designs are combined to create a next generation of audio. The cabinets are made from 25mm MDF and finished with a cherry wood veneer finished in satin lacquer. The cabinet is lined with a 36mm professional-grade sound absorption material reducing unwanted resonance.

Built-in Amplifier and Receiver Components

The built-in amplifier uses 3 parts of the TAS5754 Class-D amplifier chipset from Texas Instrument. Two chips are bridged in parallel driving the left and right woofers. Meanwhile, the third chip is set in bridge mode for both tweeters.

Digital Audio Inputs

The SPDIF receiver uses a PCM 9211 from Texas Instrument that supports up to 216KHz input with a low output audio signal delivered to the XMOS processor with zero loss. The USB audio interface supports UAC2 audio with input sample rate of 192KHz avoiding signal degradation and dynamic range loss via the PC audio DAC.

Remote Control

Included with the pair of speakers is a wireless remote that allows you to switch between inputs adjust volume and mute your speakers from a distance.

Back Panel & Inputs

Connect your phone, laptop, computer and other devices with the following inputs. AUX, RCA, optical, coaxial, USB, professional balanced input, and Bluetooth. The Bluetooth input uses version 5.0 and has support for aptX codec. Bass, treble and volume controls are located on the back panel.

Specifications

TWEETER UNIT
  • Horn Loaded Ribbon Tweeter

MID-WOOFER
  • 6.5inch Aluminum Cone Underhung Design Neo. Power Mid-Woofer

AMPLIFIER SYSTEM
  • Digtal Amplifer With Xmos Processor

TOTAL POWER OUTPUT
  • L/R(Treble):10W+10W, L/R(Woofer): 70W+70W

FREQUENCY RANGE
  • 40Hz-40KHz

SIGNAL-TO-NOISE RATIO
  • L/R:≥90dB(A)

INPUT TYPE
  • AUX, Balance Input, USB, Optical, Coaxial, Bluetooth.

INPUT SENSITIVITY
  • AUX:700±50mV Balance:1150±50mV, USB:550±50mFFs, Optical:500±50mFFs Coaxial:500±50mFFs

MAINS VOLTAGE
  • 100-240 V AC/50-60 Hz

CABINET SIZE
  • 225 x 385 x 340mm

NET WEIGHT
  • 24kg (53lbs)

WEIGHT
  • 29Kg (64lbs)

A300 PROProduct description:

Hi-Res Audio Certified
The Airpulse A300Pro active speaker system is a uniquely designed combination of HiFi speaker and digital HiFi system utilizing XMOS. Because of its non-compromising design and component selection, the A300 Pro can replay all types of music to perfection.

6.5-Inch Aluminum Diaphragm Low Distortion Mid-Woofer

A300 Pro’s 6.5-inch woofer uses a high-strength magnesium-aluminum diaphragm and a costly underhung magnetic circuit design. It is supported by a 50MM diameter voice coil and an oversized, high-energy magnet. Combined with a cleverly designed heat dissipation mechanism, this woofer has the lowest distortion and highest level of dynamics, delivering clean low frequencies that are richly detailed, and deeply extended.

Horn Loaded Ribbon Tweeter

Our unique design of horn-loaded aluminum ribbon tweeter in the A300 Pro delivers to the audience every corner of wide space with airy and harmonically pleasing high-frequency musical notes. Listeners can experience rich, articulate, and evenly distributed high-frequency sound that does not fade out with distance.

Unique Design

A300 Pro features both a symmetrical acoustic and electrical design. Both left and right speakers are active. Each of them is equipped with a built-in 150W nominal high-efficiency low-ripple switch mode power supply, which preserves adequate power headroom for transient high output for the amplifier.

A Combination Of Connectors and Controls

One XLR connector and one unbalanced RCA connector with fixed gain are available for signal input. A digital attenuator is incorporated to adjust the input sensitivity. Two trimmers, one low-shelf, and one-high shelf are available for tone controls. Each speaker is working like an independently powered mono speaker that can be easily connected to the mixing console of your home studio.

Wireless Left and Right Speaker Connection

There is no need for any complicated setup settings for the A300Pro wireless speakers. Its left and right speakers were pre-paired before leaving the factory. It should be in the wireless connection mode when both speakers are power on, and the red indicators on both speakers light up constantly. Place the left and right speakers on opposite sides of a room at your ear level to create a musical experience that music was meant to be heard.

A Step Ahead in Design of a Digital Audio System

A300Pro offers a USB digital audio interface that supports UAC2 digital audio applications. An ASIO audio drive is provided to enable Windows users to have a high-quality low latency signal path out, avoiding redundant signal processing of the OS, and possible loss of quality and dynamic range.

The Bluetooth audio receiver inside the A300 Pro is built with QCC3031 from Qualcomm, which is a Bluetooth V5.0 chipset with AptX HD high-fidelity codec.

Carefully Designed Signal Processing and Amplification System

The core signal processing is built on the XMOS xCore200 multi-core processor and a DSP chip TLV320AIC3268 from Texas Instruments. Class D amplifiers used inside the speakers are Texas Instruments’ top-of-line model TPA3251. With DSP based electronic crossover, dedicated amps are used to drive woofer and tweeter independently.

TRANSPARENT Speaker Cable

No detail was left unattended in the A300PRO. A300 PRO comes with TRANSPARENT speaker cable, a US-made cable for internal connections to ensure maximum accuracy of signal transmission.

Cabinet Construction

The 25mm thick cabinet walls not only provide strong support against vibration, but it also reduces resonance and coloration. The interior is also lined with a 36mm thick professional wave-absorbing material to enhance the absorption of excess standing waves.

Wireless Remote

It also comes with a wireless remote control used for taking control of your sound. You can switch between inputs easily from the comfort of your seat.

Specifications

TWEETER UNIT

Horn Loaded Ribbon Tweeter

MID-WOOFER

6.5 inch Aluminum Cone Underhung Design Mid-Woofer

AMPLIFIER SYSTEM

Digital Amplifier With Xmos Processor

TOTAL POWER OUTPUT

L/R(Treble):10W+10W, L/R(Woofer): 120W+120W

FREQUENCY RANGE

40Hz-40KHz

SIGNAL-TO-NOISE RATIO

L/R:≥90dB(A)

INPUT TYPE

AUX, USB, Optical, Coaxial, Bluetooth, Balance Input, Unbalance Input

INPUT SENSITIVITY

Balance: 1100±50mV, Unbalance:AUX: 700±50mV, USB:550±50mFFs, Optical: 500±50mFFs, Coaxial: 500±50mFFs, Bluetooth:500±50mFFs

MAINS VOLTAGE

100-240 V AC/50-60 Hz

CABINET SIZE

225 x 385 x 350mm

NET WEIGHT

25.6Kg (56.6 lbs)

GROSS WEIGHT

29.4Kg (65 lbs)

PACKING DIMENSION

484x649x473mm


X
0